 |
Segmental
Circular Cold Saw Blades from 250 to 1610 mm diameter |
||
| Operative range: | steel cutting |
||
| Advantages: | increase of
tool life reducing of production time . |
||
 |
Segmental Circular Cold Saw
Blades from 250 bis 1610 mm diameter with tangential clearance angle (at minor flank) |
||
| . | |||
| Operative range: | steel
cutting heavy metal-cutting non-ferrous metal-cutting . |
||
| Advantages: | reducing of lateral
pick-up of cutting material increase of tool life reducing of production time |
||
| Click here for further information. | |||
 |
Carbide
Tipped Circular Saw Blades for steel cutting and for |
||
| Operative range: | thin-walled tubes and profiles |
||
| Advantages: | cutting
surface without burr economical cutting . |
||
 |
Carbide Tipped Circular Saw
Blades for steel cutting and for cutting non-ferrous metal Chip Deflector |
||
| Operative range: | cutting of
high alloyed steel e. g. x 20 Cr 13, x 45 Cr 13 cutting of heavy metal e. g. copper ingot and billets . |
||
| Advantages: | economical
cutting increase of tool life reducing of production time . |
||
|
Carbide Tipped Circular Saw
Blades for steel cutting and for cutting non-ferrous metal Vibration reduced |
||
| . | |||
| Operative range: | steel
cutting non-ferrous metal cutting e.g. cutting of bundled steel slabs copper ingot and billets . |
||
| Advantages: | noise-reduction increase of tool life |
||
| Click here for further information. | |||
 |
Hot- and
Friction Saw Blades up to 2500 mm diameter |
||
| Operative range: | tubes and profiles |
||
| Advantages: | increase of
tool life of factor 10 compared with traditional systems economical cutting cutting with little burr . |
||
| At a glance: | > 850° C (Hot Saw Blades) < 250° C (Friction Saw Blades) Vc = 100 - 140 m/sec. Vf = 80 - 2000 mm/min. |
||
| Click here for further information. | |||